Suzuki Alto Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Suzuki Alto

The Suzuki Alto is a kei car built by Suzuki. Its selling points have long included a low price and good fuel economy. The model, currently in its eighth generation, was first introduced in 1979 and has been built in many countries worldwide. The Alto badge has often been used on different cars in Japan and in export markets, where it is considered a city car. This model is offered as three or five-door hatchback, and initially it was available as a three-door van. It is produced with various petrol engines, and available with both manual and automatic transmission styles.

Suzuki Alto FAQ's

How do I adjust the clutch pedal in my Suzuki Alto?

To adjust the clutch pedal in your Suzuki Alto, start by locating the clutch master cylinder under the hood. Depending on the model year, there may be an adjustment nut on the pushrod or a self-adjusting mechanism. Consult the manual for the specific adjustment procedure. Generally, turning the adjustment nut clockwise will raise the clutch engagement point, while turning it counterclockwise will lower it. It is important to achieve the correct clutch pedal free play to ensure proper clutch operation.

How do I adjust the headlights on my Suzuki Alto?

To adjust the headlights on your Suzuki Alto, locate the adjustment screws behind the headlight assembly. There should be one screw for vertical adjustment and another for horizontal adjustment. Park the vehicle on a level surface facing a wall or garage door, approximately 25 feet away. Adjust the headlights by turning the corresponding screws until the beam pattern is aligned correctly. It is advisable to perform this adjustment during nighttime to ensure proper alignment.

How do I change the engine oil in my Suzuki Alto?

To change the engine oil in your Suzuki Alto, start by locating the oil drain plug underneath the car and place a container to catch the old oil. Remove the plug and let the oil drain completely. Once drained, replace the drain plug and proceed to remove the old oil filter. Install a new oil filter and fill the engine with the recommended amount and type of oil specified in the manual. Be sure to check the oil level using the dipstick and adjust if necessary.

How do I check and top up the brake fluid in my Suzuki Alto?

To check and top up the brake fluid in your Suzuki Alto, first, locate the brake fluid reservoir under the hood. Ensure the vehicle is on a level surface and remove the cap of the reservoir. The fluid level should be between the minimum and maximum marks indicated on the reservoir. If necessary, add the recommended brake fluid to reach the appropriate level. Take care not to spill any brake fluid on painted surfaces as it can cause damage.

How do I check the battery condition in my Suzuki Alto?

To check the battery condition in your Suzuki Alto, start by turning off all electrical components. Open the hood and locate the battery. Inspect the battery terminals for corrosion or loose connections, ensuring they are clean and tight. Use a voltmeter or a multimeter to measure the battery's voltage. A fully charged battery should read around 12.6 volts. If the voltage is significantly lower, the battery may need charging or replacement.

How do I replace a burnt-out headlight bulb in my Suzuki Alto?

To replace a burnt-out headlight bulb in your Suzuki Alto, first, open the hood and locate the back of the headlight assembly. Twist and remove the bulb's socket from the assembly. Then, carefully remove the old bulb and replace it with a new one, making sure not to touch the glass part of the bulb with bare hands. Reinsert the socket into the assembly, twist to lock it in place, and test the new headlight bulb before closing the hood.

How do I replace a faulty fuse in my Suzuki Alto?

To replace a faulty fuse in your Suzuki Alto, first, locate the fuse box, which is usually found under the dashboard or in the engine compartment. Consult the owner's manual to identify the specific fuse corresponding to the malfunctioning component. Using a fuse puller or a pair of needle-nose pliers, carefully remove the faulty fuse and replace it with a new one of the same amperage rating. Ensure the replacement fuse is securely seated and test the corresponding component to verify proper operation.

How do I replace the windshield wiper blades on my Suzuki Alto?

To replace the windshield wiper blades on your Suzuki Alto, lift the wiper arm away from the windshield until it locks into a raised position. Locate the release tab or button on the wiper blade assembly and press or pull it to release the old blade. Then, attach the new wiper blade by following the manufacturer's instructions. Carefully lower the wiper arm back onto the windshield, ensuring the new blade is securely attached and properly aligned.

How do I reset the maintenance required light in my Suzuki Alto?

To reset the maintenance required light in your Suzuki Alto, insert the key into the ignition and turn it to the ON position without starting the engine. Press and hold the trip meter reset button until the maintenance light starts flashing. Release the button and start the engine. The maintenance light should no longer be illuminated, indicating a successful reset.

How do I troubleshoot a faulty power window in my Suzuki Alto?

If you are experiencing issues with a power window in your Suzuki Alto, first, check if the window lock switch is engaged, as it may prevent individual windows from operating. If the lock switch is not the problem, ensure the window's fuse is intact. If the fuse is fine, the issue may lie with the window motor or the switch itself, requiring further diagnosis and potentially replacement. It is recommended to consult the repair manual or seek professional assistance for a more accurate diagnosis and repair.

How often should I change the spark plugs in my Suzuki Alto?

The spark plugs in your Suzuki Alto should be replaced every 30,000 to 50,000 miles or as recommended in the manual. Regularly changing the spark plugs ensures proper ignition and combustion, leading to improved engine performance and fuel efficiency. It is important to use the correct type of spark plugs specified by the manufacturer for optimal performance.

How often should I replace the air filter in my Suzuki Alto?

It is recommended to replace the air filter in your Suzuki Alto every 12,000 to 15,000 miles or as specified in the manual. Regularly checking and replacing the air filter is important to maintain proper air intake and prevent contaminants from entering the engine. A clogged or dirty air filter can lead to reduced engine performance and fuel efficiency.

What is the recommended tire pressure for my Suzuki Alto?

The recommended tire pressure for your Suzuki Alto can be found in the owner's manual or on a sticker located on the driver's side door jamb. The correct tire pressure ensures optimal handling, fuel efficiency, and tire longevity. It is important to check and adjust the tire pressure regularly, especially before long trips or when carrying heavy loads.

What type of coolant should I use for my Suzuki Alto?

It is important to use the recommended coolant specified in your Suzuki Alto's manual. Typically, this would be a long-life ethylene glycol-based coolant suitable for aluminum engines. Using the correct coolant helps maintain optimal engine temperature, prevents overheating, and provides corrosion protection for the cooling system components. It is crucial to follow the manufacturer's guidelines to ensure the best performance and longevity of your vehicle.

Suzuki Alto Manuals Index

Suzuki Alto Workshop Manual

Suzuki Alto Owners Manual

Related Models