Nissan 350Z Workshop Manuals and Repair Manuals

To change the oil in your Nissan 350Z, start by placing a drain pan under the oil drain plug located on the bottom of the engine. Loosen the plug with a wrench, allowing the old oil to drain out completely. Once drained, replace the drain plug, remove the oil filter using an oil filter wrench, and install a new filter. Finally, add the recommended amount of new oil to the engine through the oil fill cap.

To replace the brake pads on your Nissan 350Z, start by safely jacking up the vehicle and removing the wheels. Locate the brake caliper and remove the bolts holding it in place. Once the caliper is loose, carefully remove the old brake pads and replace them with new ones. Before reassembling, make sure to compress the caliper piston using a C-clamp or a specialized tool. Finally, reattach the caliper, reinstall the wheels, and repeat the process for the other wheels.

The recommended tire pressures for a Nissan 350Z may vary depending on the specific model and tire size. However, as a general guideline, the front tires should be inflated to around 32 PSI, while the rear tires should be inflated to approximately 30 PSI. It's important to consult your vehicle's owner manual or the tire placard located on the driver's side door jamb for the most accurate and specific information.