Microcar MC2 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Microcar MC2

Microcar is a French microcar manufacturer. The company was founded in 1984 as a division of Bénéteau group, a major sailboat manufacturer. The current model range consists solely of the M.Go model introduced in 2009. Prior to the M.Go, Microcar was known for their long-running MC Series models, sold in English-speaking markets as the short-wheelbase MC1 and long-wheelbase MC2. The MC1 and MC2 were launched in the UK in April 2004 and November 2006 respectively. Those models were built with 505 cc petrol or 523 cc diesel engine.

Microcar MC2 FAQ's

How do I change a flat tire on my Microcar MC2?

To change a flat tire on your Microcar MC2, first, locate the spare tire, jack, and lug wrench in the trunk. Place the jack under the vehicle's designated jack points, raise the car until the flat tire is off the ground, and then remove the lug nuts using the lug wrench. Replace the flat tire with the spare tire, hand-tighten the lug nuts, lower the car, and then fully tighten the lug nuts in a crisscross pattern.

How do I check the brake fluid level in my Microcar MC2?

To check the brake fluid level in your Microcar MC2, locate the brake fluid reservoir under the hood. The reservoir is typically located near the firewall on the driver's side. Ensure the vehicle is parked on a level surface, remove the cap from the reservoir, and visually inspect the fluid level. The brake fluid should be between the minimum and maximum marks on the reservoir.

How do I check the engine oil level in my Microcar MC2?

To check the engine oil level in your Microcar MC2, locate the dipstick located under the hood. With the engine turned off, remove the dipstick, wipe it clean, reinsert it fully into the oil reservoir, and then remove it again to check the oil level. The oil level should be between the minimum and maximum marks on the dipstick.

How do I check the power steering fluid level in my Microcar MC2?

To check the power steering fluid level in your Microcar MC2, locate the power steering fluid reservoir, which is typically near the front of the engine compartment. With the engine off, remove the cap from the reservoir and visually inspect the fluid level. The fluid should be between the minimum and maximum marks on the reservoir. If necessary, add the appropriate type of power steering fluid to bring the level within the recommended range.

How do I check the transmission fluid level in my Microcar MC2?

To check the transmission fluid level in your Microcar MC2, start the engine and allow it to reach normal operating temperature. Locate the transmission dipstick, which is usually labeled and located near the back of the engine compartment. With the engine running and the transmission in park or neutral, remove the dipstick, wipe it clean, reinsert it fully, and then remove it again to check the fluid level. The level should be within the designated range on the dipstick.

How do I engage the parking brake in my Microcar MC2?

To engage the parking brake in your Microcar MC2, ensure the vehicle is stationary and the gear selector is in the neutral position. Locate the parking brake lever, typically located between the front seats or on the lower left side of the driver's side footwell. Pull up on the lever firmly until it is fully engaged. To release the parking brake, press the release button (if applicable) and lower the lever back to its original position.

How do I replace a burnt-out headlight bulb on my Microcar MC2?

To replace a burnt-out headlight bulb on your Microcar MC2, open the hood and locate the rear of the headlight assembly. Disconnect the electrical connector from the back of the bulb, then twist and remove the bulb from the socket. Insert a new bulb into the socket, ensuring it is securely in place, then reconnect the electrical connector. Test the headlight to ensure it is functioning properly before closing the hood.

How do I reset the maintenance light on my Microcar MC2?

To reset the maintenance light on your Microcar MC2, turn the ignition switch to the ON position without starting the engine. Press and hold the trip odometer reset button until the maintenance light starts flashing, then release the button. Turn the ignition off and then start the engine. The maintenance light should be reset and no longer illuminated.

How often should I change the engine air filter on my Microcar MC2?

It is recommended to check and replace the engine air filter in your Microcar MC2 every 12,000 to 15,000 miles or as indicated in the vehicle's maintenance schedule. A dirty or clogged air filter can restrict airflow to the engine, leading to decreased performance and fuel efficiency. Regularly inspecting and replacing the air filter will help maintain optimal engine performance.

How often should I change the engine coolant in my Microcar MC2?

The engine coolant in your Microcar MC2 should be replaced every 30,000 to 50,000 miles or as recommended in the vehicle's maintenance schedule. Over time, coolant can become contaminated and lose its effectiveness, which can lead to engine overheating and damage. Regularly flushing and replacing the engine coolant will help ensure proper engine cooling and longevity.

How often should I replace the cabin air filter in my Microcar MC2?

The cabin air filter in your Microcar MC2 should be replaced every 12,000 to 15,000 miles or as recommended in the vehicle's maintenance schedule. A dirty or clogged cabin air filter can reduce the effectiveness of the HVAC system, decrease airflow, and lead to unpleasant odors inside the vehicle. Regularly replacing the cabin air filter will help maintain a clean and comfortable interior environment.

How often should I replace the spark plugs in my Microcar MC2?

The spark plugs in your Microcar MC2 should be replaced every 30,000 to 45,000 miles or as recommended in the vehicle's maintenance schedule. Worn-out or fouled spark plugs can cause misfires, reduced fuel efficiency, and engine performance issues. Regularly inspecting and replacing the spark plugs will help ensure smooth engine operation.

What is the recommended tire pressure for my Microcar MC2?

The recommended tire pressure for your Microcar MC2 can be found in the owner's manual or on a sticker located on the driver's side door jamb. It may vary depending on the specific model and tire size. Proper tire pressure is crucial for safe driving, even tire wear, and optimal fuel efficiency, so it is important to regularly check and maintain the recommended tire pressure.

What should I do if the battery of my Microcar MC2 is dead?

If the battery of your Microcar MC2 is dead, you can jump-start the vehicle using jumper cables and a running vehicle with a charged battery. Connect the positive (+) terminals of both batteries with the red jumper cable, then connect the negative (-) terminal of the good battery to a metal ground point on the dead vehicle, and start the engine of the running vehicle. Allow the dead battery to charge for a few minutes, then attempt to start your Microcar MC2.

What type of fuel should I use for my Microcar MC2?

Your Microcar MC2 is designed to run on unleaded gasoline with an octane rating of 91 or higher. It is recommended to use high-quality fuel from reputable gas stations to ensure optimal performance and prevent engine damage. Avoid using ethanol-blended fuels that contain more than 10% ethanol as it may negatively impact the engine's performance.