Lexus GS 460 Workshop Manuals and Repair Manuals

If you experience a flat tire in your Lexus GS 460, start by finding a safe location away from traffic. Locate the spare tire, jack, and lug wrench in the trunk. Loosen the lug nuts on the flat tire, jack up the vehicle using the designated points, remove the lug nuts and flat tire, and install the spare tire. After securely tightening the lug nuts, lower the vehicle and double-check the lug nuts' tightness.

To check the automatic transmission fluid level in your Lexus GS 460, start the engine, shift the transmission through each gear, and then put it back into Park. Locate the transmission dipstick, usually near the back of the engine compartment, and remove it. Wipe it clean, reinsert it, and remove it again to check the fluid level. The fluid level should be within the designated marks on the dipstick.

To check the tire pressure in your Lexus GS 460, start by ensuring the tires are cold. Locate the tire pressure monitoring system (TPMS) button, usually located near the steering column, and press and hold it until the TPMS light blinks. This indicates the system is in calibration mode. Starting from the driver's side front tire, use a tire pressure gauge to check the pressure of each tire, including the spare, and adjust as necessary.

If you need to jump-start your Lexus GS 460, start by locating the positive (+) and negative (-) battery terminals in both your vehicle and the donor vehicle. Connect the red jumper cable to the positive terminal of the dead battery, then connect the other end of the red cable to the positive terminal of the donor vehicle's battery. Next, connect the black jumper cable to the negative terminal of the donor vehicle's battery and attach the other end to a metal, unpainted part of your vehicle's engine block. Start the donor vehicle and let it run for a few minutes, then try starting your Lexus GS 460. Once the engine starts, carefully disconnect the jumper cables in the reverse order.

To replace a headlight bulb in your Lexus GS 460, open the hood and locate the back of the headlight assembly. Depending on the specific model year, you may need to remove a cover or disconnect electrical connectors. Once you have access to the bulb, twist it counterclockwise or release the retaining clip, depending on the bulb type, and carefully remove it. Insert the new bulb, ensuring it is properly aligned, and secure it in place. Reconnect any electrical connectors and reinstall any covers if applicable.

To reset the maintenance light on your Lexus GS 460, turn the ignition switch to the "ON" position without starting the engine. Locate the trip meter reset button and press and hold it until the maintenance light starts flashing. Release the button, and the light should go off. This indicates that the maintenance light has been successfully reset.

It is recommended to change the engine oil in your Lexus GS 460 every 5,000 to 7,500 miles or every six months, whichever comes first. Regular oil changes are crucial to maintain the longevity and performance of your vehicle's engine. Neglecting to change the oil on time can lead to engine damage and reduced fuel efficiency.

It is generally recommended to replace the air filter in your Lexus GS 460 every 15,000 to 30,000 miles, depending on your driving conditions. A clean air filter ensures optimal airflow to the engine, improving fuel efficiency and prolonging the life of engine components. However, if you frequently drive in dusty or off-road environments, it's best to inspect and replace the air filter more frequently to prevent engine damage.

The brake pads in a Lexus GS 460 typically need to be replaced every 30,000 to 70,000 miles, depending on driving habits and conditions. Regular brake inspections are crucial to determine the condition of the brake pads. If you notice any signs of wear, such as squeaking or reduced braking performance, it is recommended to have them replaced promptly to ensure safe braking.

The cabin air filter in a Lexus GS 460 should typically be replaced every 15,000 to 30,000 miles, depending on driving conditions and air quality. A clean cabin air filter improves the air quality inside the vehicle by trapping dust, pollen, and other airborne particles. Regular replacement ensures proper HVAC system performance and helps maintain a comfortable cabin environment.

The fuel filter in a Lexus GS 460 typically needs to be replaced every 60,000 to 90,000 miles, depending on driving conditions and fuel quality. Regular fuel filter replacement helps maintain proper fuel flow and prevents contaminants from reaching the engine. If you notice reduced engine performance or fuel efficiency, it may be time to replace the fuel filter.

The serpentine belt in a Lexus GS 460 typically needs to be replaced every 60,000 to 100,000 miles, depending on driving conditions and belt quality. Regular inspection of the belt for signs of wear, such as cracks or fraying, is essential. If you notice any damage or hear squealing noises, it's recommended to have the serpentine belt replaced promptly to avoid sudden belt failure.

The recommended interval for spark plug replacement in a Lexus GS 460 is every 60,000 to 100,000 miles, depending on driving conditions and the type of spark plugs used. Replacing the spark plugs at the recommended interval ensures proper ignition, fuel efficiency, and overall engine performance. Inspect the spark plugs regularly and consult your vehicle's manual for the specific maintenance schedule.

The recommended coolant for a Lexus GS 460 is a high-quality ethylene glycol-based coolant with a 50/50 mixture of coolant and distilled water. Using the correct coolant and maintaining the proper coolant level is essential to prevent engine overheating and to protect the engine from corrosion and freezing in extreme temperatures. Always refer to your vehicle's manual for the specific coolant requirements.

For the automatic transmission in a Lexus GS 460, it is recommended to use Toyota Genuine ATF WS (World Standard) transmission fluid. Using the correct transmission fluid is essential for smooth shifting, optimal performance, and longevity of the transmission. Always refer to your vehicle's manual for the specific fluid requirements and any additional maintenance procedures.