Ferrari F355 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Ferrari F355

The Ferrari F355 (Type F129) is a sports car built by Ferrari from May 1994 to 1999. It is an evolution of the Ferrari 348 and was replaced by the Ferrari 360. It is a mid-engined, rear wheel drive, V8-powered two-seat coupe, targa, or convertible. The improvements from the 348 could be found in its greater adaptability across differing speeds and in different environments. So, though a sports car, the adaptations had made it more suitable to driving in other conditions.

Ferrari F355 FAQ's

How do I bleed the brakes on my Ferrari F355?

Bleeding the brakes on a Ferrari F355 requires connecting a bleed hose to the brake caliper and pumping the brake pedal while opening and closing the bleeder valve. The process is repeated until all air bubbles are eliminated from the brake fluid. It is important to use the correct type of brake fluid and to follow the correct sequence and torque settings.

How do I change the oil in my Ferrari F355?

Changing the oil in a Ferrari F355 requires draining the old oil, replacing the oil filter, and refilling the engine with fresh oil. It is important to use the recommended oil type and viscosity, and to check the oil level regularly. The specific steps for changing the oil can be found in the owner's manual or service manual.

How do I check and adjust the valve clearances on my Ferrari F355?

Checking and adjusting the valve clearances on a Ferrari F355 requires removing the cam covers and using a feeler gauge to measure the valve clearances. The clearances can then be adjusted by changing the shims under the cam followers. It is important to follow the correct sequence and torque settings when reassembling the cam covers.

How do I diagnose and repair an electrical problem on my Ferrari F355?

Diagnosing and repairing an electrical problem on a Ferrari F355 requires using a multimeter and wiring diagram to test the various electrical components. It is important to check the fuses and relays first, as these are often the cause of electrical problems. Repairs may involve replacing a faulty component or rewiring a damaged circuit.

How do I remove and replace a wheel on my Ferrari F355?

Removing and replacing a wheel on a Ferrari F355 requires using a jack and wheel wrench to loosen and remove the lug nuts. The wheel can then be lifted off and replaced with a new one. It is important to use the correct type of wheel and to follow the correct torque settings when tightening the lug nuts.

How do I replace the air filter on my Ferrari F355?

Replacing the air filter on a Ferrari F355 requires locating the air filter housing and removing the old filter. The new filter can then be installed and the housing reassembled. It is important to use the correct type of air filter and to follow the correct torque settings when tightening the housing bolts.

How do I replace the battery on my Ferrari F355?

Replacing the battery on a Ferrari F355 requires locating the battery, disconnecting the negative and positive cables, and removing the battery hold-down bracket. The old battery can then be removed and replaced with a new one. It is important to use the correct type of battery and to follow the correct torque settings when reconnecting the cables.

How do I replace the cabin air filter on my Ferrari F355?

Replacing the cabin air filter on a Ferrari F355 requires locating the filter housing, removing the old filter, and installing a new one. The filter housing may be located under the dashboard or behind the glove box. It is important to use the correct type of cabin air filter and to follow the correct torque settings when reassembling the housing.

How do I replace the clutch on my Ferrari F355?

Replacing the clutch on a Ferrari F355 requires removing the transmission, clutch release bearing, and clutch pressure plate. The flywheel should also be checked for wear and resurfaced if necessary. It is important to use the correct type of clutch disc and to follow the correct torque settings when reassembling the clutch system.

How do I replace the fuel filter on my Ferrari F355?

Replacing the fuel filter on a Ferrari F355 requires locating the filter, disconnecting the fuel lines, and removing the old filter. The new filter can then be installed and the fuel lines reconnected. It is important to use the correct type of fuel filter and to follow the correct torque settings when reconnecting the fuel lines.

How do I replace the spark plugs on my Ferrari F355?

Replacing the spark plugs on a Ferrari F355 requires removing the engine covers and ignition coils. The old spark plugs can then be removed and replaced with new ones. It is important to use the correct type of spark plug and to follow the correct torque settings when installing the new plugs.

How do I replace the timing belt on my Ferrari F355?

Replacing the timing belt on a Ferrari F355 requires removing the engine covers, timing belt covers, and auxiliary drive belts. The timing marks must then be aligned and the tensioner adjusted before installing the new timing belt. It is important to follow the correct torque settings and reassemble the engine components in the correct order.

What is the recommended maintenance schedule for the Ferrari F355?

The recommended maintenance schedule for the Ferrari F355 includes regular oil changes, brake fluid changes, and air filter replacements. It is also important to check and adjust the valve clearances, replace the timing belt, and inspect the clutch system. The specific maintenance intervals can be found in the owner's manual or service schedule.

What kind of engine does the Ferrari F355 have?

The Ferrari F355 is equipped with a 3.5-liter V8 engine that produces 375 horsepower. It has five valves per cylinder, a high-performance exhaust system, and a six-speed manual transmission. The engine is mounted longitudinally behind the driver and has a maximum rpm of 8,500.

What type of suspension system does the Ferrari F355 use?

The Ferrari F355 uses a fully independent suspension system with double-wishbone suspension at the front and rear. It also has an electronic damper control system that adjusts the suspension damping in real-time based on road conditions and driving style. The suspension system is designed to provide excellent handling and stability at high speeds.

Ferrari F355 Manuals Index

Ferrari F355 Workshop Manual

Ferrari F355 Owners Manual

Ferrari F355 Misc Document

Related Models