Chrysler New Yorker Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Chrysler New Yorker
The Chrysler New Yorker is an automobile model which was manufactured by the Chrysler division of the Chrysler Corporation from 1940 to 1996, serving for several years as the brand's flagship model. The New York Special model was originally introduced as a distinct sub-series of the 1938 Chrysler Imperial. It was available in 1938 as a four-door sedan, for 1939 it was expanded with two more coupe versions and a two-door sedan. In 1940, first convertible models were produced. Until its discontinuation in 1996, the New Yorker had made its mark as the longest running American car nameplate. In total, 61,202 units were manufactured.Chrysler New Yorker FAQ's
How do I change the transmission fluid in my Chrysler New Yorker?
To change the transmission fluid in your Chrysler New Yorker, first locate the transmission fluid pan underneath the vehicle. Remove the pan and drain the old fluid into a suitable container. Replace the old filter with a new one, then reinstall the pan and fill the transmission with the recommended fluid type and quantity. It is important to check the fluid level and condition regularly and change it according to the manufacturer's recommendations.
How do I check the coolant level in my Chrysler New Yorker?
To check the coolant level in your Chrysler New Yorker, first make sure the engine is cool and the vehicle is on level ground. Remove the radiator cap and check the coolant level in the radiator. If necessary, add coolant to the radiator or overflow reservoir to bring it up to the recommended level. Be sure to use the proper type of coolant for your vehicle.
How do I diagnose a check engine light in my Chrysler New Yorker?
To diagnose a check engine light in your Chrysler New Yorker, first use an OBD-II scanner to read the diagnostic trouble codes (DTCs) stored by the vehicle's onboard computer. Look up the codes in the repair manual to determine the possible causes of the issue, then perform the necessary tests and repairs to fix the problem. It is important to clear the codes and test drive the vehicle to ensure the issue has been resolved.
How do I replace a headlight bulb in my Chrysler New Yorker?
To replace a headlight bulb in your Chrysler New Yorker, locate the headlight assembly on the front of the vehicle. Remove the retaining clip or screws and pull the assembly away from the vehicle. Disconnect the wiring harness from the back of the headlight, then twist and remove the old bulb. Replace it with a new bulb and reassemble the headlight assembly.
How do I replace the air filter in my Chrysler New Yorker?
To replace the air filter in your Chrysler New Yorker, open the hood and locate the air filter housing on the top of the engine. Unfasten the clips and remove the housing cover to access the air filter. Remove the old air filter and replace it with a new one, then reattach the housing cover and clips.
How do I replace the alternator in my Chrysler New Yorker?
To replace the alternator in your Chrysler New Yorker, first disconnect the battery and remove the drive belt from the alternator pulley. Remove the electrical connections and bolts holding the alternator in place, then remove the old alternator from the engine. Install the new alternator and reattach the electrical connections and bolts, then reinstall the drive belt and reconnect the battery.
How do I replace the battery in my Chrysler New Yorker?
To replace the battery in your Chrysler New Yorker, first disconnect the negative cable from the battery terminal. Remove the battery hold-down bracket and any other cables or brackets attached to the battery. Lift the old battery out of the engine compartment and install the new battery in its place, reattaching the hold-down bracket and any other cables or brackets.
How do I replace the brake pads in my Chrysler New Yorker?
To replace the brake pads in your Chrysler New Yorker, first remove the wheel and locate the brake caliper. Remove the caliper bolts and slide the caliper off the rotor. Remove the old brake pads and replace them with new ones, then reattach the caliper and wheel. Be sure to properly torque all bolts to the manufacturer's specifications.
How do I replace the fuel filter in my Chrysler New Yorker?
To replace the fuel filter in your Chrysler New Yorker, locate the fuel filter housing on the underside of the vehicle. Remove the fuel lines and retaining clips from the filter, then remove the old filter from the housing. Install the new filter and reattach the fuel lines and retaining clips, being sure to properly torque all connections.
How do I replace the serpentine belt in my Chrysler New Yorker?
To replace the serpentine belt in your Chrysler New Yorker, first locate the belt routing diagram on the underside of the hood or in the repair manual. Use a serpentine belt tool or breaker bar to release tension on the belt tensioner, then slide the belt off of the pulleys. Install the new belt according to the diagram and release the tensioner to apply tension to the new belt. Check the belt tension and alignment to ensure proper operation.
How do I replace the windshield wipers on my Chrysler New Yorker?
To replace the windshield wipers on your Chrysler New Yorker, lift the wiper arm from the windshield and press the release tab on the wiper blade. Slide the old wiper blade off and replace it with a new one, making sure it is securely attached to the wiper arm. Repeat the process for the other wiper blade.
How do I troubleshoot an engine misfire in my Chrysler New Yorker?
To troubleshoot an engine misfire in your Chrysler New Yorker, start by checking the spark plugs and ignition coils for damage or wear. If they appear to be in good condition, check the fuel injectors and wiring for any issues. If all of these components are functioning properly, it may be necessary to perform a compression test or inspect the engine for deeper issues.
What is the recommended oil type and capacity for a Chrysler New Yorker?
The recommended oil type for a Chrysler New Yorker is 5W-30. The oil capacity for the engine is 5 quarts, including the filter. It is important to check the oil level regularly and change the oil every 3,000 miles or three months, whichever comes first.
What is the recommended tire pressure for a Chrysler New Yorker?
The recommended tire pressure for a Chrysler New Yorker is 32 PSI for all four tires. It is important to check the tire pressure regularly and ensure that all tires are properly inflated to improve fuel efficiency and vehicle handling.
Chrysler New Yorker Manuals Index
Chrysler New Yorker on Amazon
Chrysler New Yorker Workshop Manual
-
- Chrysler New Yorker 1955 Workshop Manual
- (682 Pages)
- (Free)
-
- Chrysler New Yorker 1956 Workshop Manual
- (476 Pages)
- (Free)
-
- Chrysler New Yorker 1957 Workshop Manual
- (458 Pages)
- (Free)
-
- Chrysler New Yorker 1958 Workshop Manual
- (504 Pages)
- (Free)
- (Free)
-
- Chrysler New Yorker 1960 1961 Workshop Manual
- (801 Pages)
- (Free)
-
- Chrysler New Yorker 1962 Workshop Manual
- (621 Pages)
- (Free)
-
- Chrysler New Yorker 1963 Workshop Manual
- (557 Pages)
- (Free)
-
- Chrysler New Yorker 1964 Workshop Manual
- (627 Pages)
- (Free)
-
- Chrysler New Yorker 1965 Workshop Manual
- (585 Pages)
- (Free)
-
- Chrysler New Yorker 1966 Workshop Manual
- (624 Pages)
- (Free)
-
- Chrysler New Yorker 1970 Workshop Manual
- (700 Pages)
- (Free)
-
- Chrysler New Yorker 1971 Workshop Manual
- (302 Pages)
- (Free)
-
- Chrysler New Yorker 1972 Workshop Manual
- (984 Pages)
- (Free)
-
- Chrysler NewYorker 1993 Workshop Manual
- (820 Pages)
- (Free)
-
- Chrysler NewYorker 1994 Workshop Manual
- (1,203 Pages)
- (Free)
-
- Chrysler NewYorker 1997 Workshop Manual
- (1,659 Pages)
- (Free)
Chrysler New Yorker Owners Manual
-
- Chrysler New Yorker 1977 Owners Manual
- (77 Pages)
- (Free)
-
- Chrysler New Yorker 1978 Owners Manual
- (91 Pages)
- (Free)
Chrysler New Yorker Misc Document
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
Related Models
