Chrysler Concorde Workshop Manuals and Repair Manuals

To change the air filter on a Chrysler Concorde, locate the air filter housing unit, which is typically located near the engine. Open the housing unit and remove the old filter. Replace with a new filter and securely close the housing unit. It is recommended to change the air filter every 12,000 to 15,000 miles for optimal performance.

To check the transmission fluid on a Chrysler Concorde, first, ensure the vehicle is on a level surface and the engine is running. Locate the transmission fluid dipstick, typically near the back of the engine bay. Remove the dipstick, wipe it clean, and reinsert it. Remove again and check the fluid level. Always consult your owner's manual for specific maintenance recommendations.

To replace the battery on a Chrysler Concorde, first, remove the negative cable followed by the positive cable. Remove any brackets or clamps securing the battery in place and then remove the old battery. Replace with a new battery and reattach the cables and any brackets or clamps. Always follow the manufacturer's recommended procedures and use proper safety precautions.

To replace the brake pads on a Chrysler Concorde, first, jack up the vehicle and remove the wheel. Locate the brake caliper and remove the old brake pads. Replace with new brake pads and reassemble the caliper and wheel. Always follow the manufacturer's recommended procedures and use proper safety precautions.

To replace the headlights on a Chrysler Concorde, locate the headlight assembly and remove the retaining screws or clips. Pull the assembly forward and disconnect the wiring harness. Replace with a new headlight and reattach the wiring harness and retaining screws or clips. Always follow the manufacturer's recommended procedures and use proper safety precautions.

To replace the serpentine belt on a Chrysler Concorde, first, locate the tensioner pulley and release the tension. Remove the old belt and replace with a new one. Reapply tension to the belt using the tensioner pulley. Always follow the manufacturer's recommended procedures and use proper safety precautions.

Chrysler recommends changing the spark plugs on a Concorde every 30,000 miles. Worn or dirty spark plugs can cause poor engine performance and decreased fuel efficiency. Always consult your owner's manual for specific maintenance recommendations.

A grinding noise while braking on a Chrysler Concorde can be caused by worn brake pads or rotors, a damaged caliper, or debris in the braking system. It is best to have a mechanic diagnose the issue to determine the root cause and make necessary repairs.

A knocking sound on a Chrysler Concorde can be caused by a variety of issues, including worn engine bearings, a damaged piston, or low oil pressure. It is best to have a mechanic diagnose the issue to determine the root cause and make necessary repairs.

Several factors can cause a Chrysler Concorde to overheat, including a faulty thermostat, a malfunctioning water pump, a clogged radiator, or low coolant levels. It is best to have a mechanic diagnose the issue to determine the root cause and make necessary repairs.

A Chrysler Concorde that pulls to one side while driving can be caused by several factors, including misaligned wheels, worn suspension components, or an issue with the steering system. It is best to have a mechanic diagnose the issue to determine the root cause and make necessary repairs.

Several factors can cause a Chrysler Concorde to stall, including faulty fuel injectors, a bad fuel pump, a clogged air filter, or a malfunctioning ignition system. It is best to have a mechanic diagnose the issue to determine the root cause and make necessary repairs.

A vibrating Chrysler Concorde can be caused by several factors, including unbalanced tires, worn suspension components, or a damaged driveshaft. It is best to have a mechanic diagnose the issue to determine the root cause and make necessary repairs.

Chrysler recommends using 5W-30 oil for the Concorde. It is important to use the correct oil to ensure optimal engine performance and longevity. Always check your owner's manual or consult with a mechanic to confirm the recommended oil type for your specific vehicle.

The recommended tire pressure for a Chrysler Concorde is typically 32 PSI for both the front and rear tires. Proper tire pressure ensures optimal handling and fuel efficiency. Always check your owner's manual or consult with a mechanic for the recommended tire pressure for your specific vehicle.