Chevrolet Epica Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Chevrolet Epica
The Chevrolet Epica was a mid-size class car manufactured by GM Daewoo, a South Korean company, under the model name Daewoo Tosca but marketed by GM as the Chevrolet Epica. It replaced the Daewoo Magnus and came fitted with transversely-mounted straight-six engines. The engine was available in 90 kW 1.8L, 110 kW 2.0 L turbo diesel or 115kW 2.6L configurations. It had a wheelbase of 2 70 0 mm, 4 80 8mm length, 1 810 mm width and 1 450 mm height. It was later succeeded by the Chevrolet Malibu.
Chevrolet Epica FAQ's
How do I change the oil in a Chevrolet Epica?
To change the oil in a Chevrolet Epica, start by warming up the engine to ensure the oil flows easily. Next, locate the oil drain plug and place a container beneath it to catch the old oil. Once the old oil has drained out, replace the oil filter and refill the engine with the recommended oil type and amount specified in the manual.
How do I replace the air filter on a Chevrolet Epica?
To replace the air filter on a Chevrolet Epica, locate the air filter housing and remove the clips or screws that hold it in place. Next, remove the old air filter and insert a new one, making sure it is properly seated and the housing is securely fastened.
How do I replace the alternator on a Chevrolet Epica?
To replace the alternator on a Chevrolet Epica, start by disconnecting the battery and removing the serpentine belt. Next, disconnect the electrical connections and mounting bolts that hold the alternator in place. Finally, remove the old alternator and install the new one, making sure all electrical connections and mounting bolts are properly secured.
How do I replace the brake pads on a Chevrolet Epica?
To replace the brake pads on a Chevrolet Epica, start by removing the wheel and loosening the brake caliper bolts. Next, remove the old brake pads and inspect the caliper and brake rotor for wear or damage. If necessary, replace these components before installing the new brake pads and tightening the caliper bolts.
How do I replace the cabin air filter on a Chevrolet Epica?
To replace the cabin air filter on a Chevrolet Epica, locate the filter housing behind the glove box and remove the retaining clips or screws. Next, remove the old filter and insert a new one, making sure it is properly seated and the housing is securely fastened.
How do I replace the fuel filter on a Chevrolet Epica?
To replace the fuel filter on a Chevrolet Epica, locate the filter and disconnect the fuel lines from either end. Next, remove the old filter and install the new one, making sure the fuel lines are properly connected and there are no leaks.
How do I replace the radiator on a Chevrolet Epica?
To replace the radiator on a Chevrolet Epica, start by draining the coolant from the radiator and removing the upper and lower hoses. Next, remove the fan assembly and any mounting bolts that hold the radiator in place. Finally, remove the old radiator and install the new one, making sure all hoses and connections are properly secured.
How do I replace the serpentine belt on a Chevrolet Epica?
To replace the serpentine belt on a Chevrolet Epica, locate the tensioner pulley and release tension on the belt by turning the tensioner bolt counterclockwise. Next, remove the old belt and install the new belt according to the routing diagram in the manual. Finally, use the tensioner bolt to tighten the belt to the correct tension.
How do I replace the spark plugs on a Chevrolet Epica?
To replace the spark plugs on a Chevrolet Epica, locate the spark plug wires and disconnect them from the plugs. Next, use a spark plug socket and ratchet to remove the old plugs and install the new ones, making sure they are properly gapped and torqued to the correct specifications.
How do I replace the thermostat on a Chevrolet Epica?
To replace the thermostat on a Chevrolet Epica, start by draining the coolant from the radiator and removing the thermostat housing. Next, remove the old thermostat and install the new one, making sure it is properly seated and the housing is securely fastened. Finally, refill the radiator with the recommended coolant type and amount.
How do I replace the windshield wipers on a Chevrolet Epica?
To replace the windshield wipers on a Chevrolet Epica, lift the wiper arm away from the windshield and press the release tab on the wiper blade. Slide the blade off the arm and install the new blade by sliding it onto the arm until it clicks into place.
What should I do if my Chevrolet Epica won't start?
If your Chevrolet Epica won't start, start by checking the battery to ensure it has enough charge to turn the engine over. If the battery is good, check the starter motor and ignition system for faults. If these components are working properly, check the fuel system and ensure there is enough fuel in the tank.
Why is my Chevrolet Epica's air conditioning not working?
The air conditioning system in a Chevrolet Epica can fail for a variety of reasons, including low refrigerant levels, a faulty compressor, or a broken fan. Start by checking the refrigerant levels and inspecting the compressor and fan for damage. If necessary, replace these components before recharging the system.
Why is my Chevrolet Epica's check engine light on?
The check engine light on a Chevrolet Epica can indicate a variety of issues, including a faulty oxygen sensor, misfiring spark plugs, or a loose gas cap. Use an OBD-II scanner to read the error code and determine the exact cause of the issue before attempting to fix it.
Why is my Chevrolet Epica's transmission slipping?
A slipping transmission in a Chevrolet Epica can be caused by low fluid levels, a faulty torque converter, or worn clutch plates. Start by checking the fluid levels and inspecting the torque converter and clutch plates for damage. If necessary, replace these components before attempting to fix the issue.
Get notified for new manuals?
We'll send you a quick email when a new Chevrolet Epica manual is added.