Aston Martin V12 Vantage Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Aston Martin V12 Vantage
The Aston Martin V12 Vantage is hand-built sports cars from the British manufacturer Aston Martin, introduced in 2009. Aston Martin has previously used the "Vantage" name on high-performance variants of their existing GT models, notably on the Virage-based car of the 1990s. The modern car, in contrast, is the leanest and most agile car in Aston's lineup. The Aston Martin V12 Vantage has been confirmed for the US market. V12 Vantage S is a sportier version of the V12 Vantage and was announced on the May 28, 2013.
Aston Martin V12 Vantage FAQ's
How do I bleed the brake system on my Aston Martin V12 Vantage?
The brake fluid should be replaced every two years or 20,000 miles. The brake system can be bled by starting at the wheel furthest from the master cylinder and working towards it. A brake bleeder kit can be used to make the process easier. It is important to use the recommended type of brake fluid and to not let the brake fluid level drop too low during the process.
How do I change the brake pads on my Aston Martin V12 Vantage?
The brake pads can be accessed by removing the wheels and calipers. The old pads should be carefully removed and the new pads should be installed in their place. It is also important to properly bed in the new pads to ensure optimal braking performance.
How do I check the coolant level in my Aston Martin V12 Vantage?
The coolant level should be checked when the engine is cold. The coolant reservoir is located near the front of the engine bay and should be filled to the max mark with a 50/50 mixture of coolant and distilled water. It is also important to check for leaks in the cooling system.
How do I check the tire pressure on my Aston Martin V12 Vantage?
The tire pressure should be checked when the tires are cold using a tire pressure gauge. The recommended tire pressure can be found in the owner’s manual or on the driver’s side door jamb. It is important to ensure that all four tires are inflated to the same pressure.
How do I check the transmission fluid level in my Aston Martin V12 Vantage?
The transmission fluid level should be checked while the engine is running and the transmission is in neutral. The dipstick is located near the back of the engine bay and should be wiped clean before inserting it back in to get an accurate reading. The fluid level should be between the minimum and maximum marks on the dipstick.
How do I replace a blown fuse in my Aston Martin V12 Vantage?
The fuse box is located in the trunk and can be accessed by removing the cover. The blown fuse should be identified using the diagram on the cover or in the owner’s manual. It can then be removed using a fuse puller and replaced with a new fuse of the same rating.
How do I replace the battery in my Aston Martin V12 Vantage?
The battery is located in the trunk and can be accessed by removing the cover. The negative cable should be disconnected first, followed by the positive cable. The old battery can then be removed and the new battery can be installed. The positive cable should be connected first, followed by the negative cable.
How do I replace the cabin air filter in my Aston Martin V12 Vantage?
The cabin air filter is located behind the glove box and can be accessed by removing it. The old filter can be removed and the new filter can be installed in its place. It is also important to clean the filter housing before installing the new filter.
How do I replace the serpentine belt on my Aston Martin V12 Vantage?
The serpentine belt can be accessed by removing the engine cover and the front right wheel. The tensioner should be released and the old belt can be removed. The new belt can then be installed by following the manufacturer’s instructions and the tensioner can be re-engaged.
How do I replace the spark plugs on my Aston Martin V12 Vantage?
The spark plugs can be accessed by removing the engine cover and the ignition coils. The old spark plugs should be removed and the new spark plugs should be installed using a torque wrench. It is important to ensure that the new spark plugs are gapped correctly.
How do I replace the windshield wipers on my Aston Martin V12 Vantage?
The old wiper blades can be removed by pulling them away from the windshield and pressing the release tab. The new wiper blades can then be installed by following the manufacturer’s instructions. It is important to check the alignment of the blades and test them before driving.
How do I reset the service indicator on my Aston Martin V12 Vantage?
The service indicator can be reset by turning the ignition key to the “on” position without starting the engine. The trip button should then be held until the service indicator flashes. It can then be reset by releasing the trip button and turning off the ignition.
How often should I change the engine oil in my Aston Martin V12 Vantage?
Oil change is recommended every 10,000 miles or 12 months, whichever comes first. Using high-quality synthetic oil is recommended to ensure optimal engine performance and protection. It is also important to check the oil level regularly and top it up if necessary.
How often should I replace the air filter in my Aston Martin V12 Vantage?
The air filter should be checked every 12 months or 10,000 miles and replaced if necessary. A clogged air filter can reduce engine performance and fuel efficiency. It is also important to replace the filter after driving in dusty or sandy conditions.
What type of fuel should I use for my Aston Martin V12 Vantage?
Premium unleaded gasoline with a minimum octane rating of 91 should be used for the V12 engine. Using lower octane fuel can cause engine knocking and damage. It is also recommended to avoid using ethanol-blended fuels as they can cause corrosion in the fuel system.
Get notified for new manuals?
We'll send you a quick email when a new Aston Martin V12 Vantage manual is added.