Alpina B12 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Alpina B12

The Apina B12 is based on the twelve-cylinder models in the BMW 7 - Series, the BMW 750i and long-wheelbase 750iL. The first B12 labeled 5.0 was released in 1988 on the market in 1999 followed the ALPINA B12 6.0 based on the BMW E38. The 430-hp twelve-cylinder engine with six 6.0 liter engine catapults the B12 in 5.9 seconds from 0 to 100 km/. Top speed is not already governed at 250 km/h, the Alpina B12 unthrottled reached a top speed of 290 km/h.

Alpina B12 FAQ's

How do I change the oil in my Alpina B12?

To change the oil in your Alpina B12, you will need to locate the oil drain plug and oil filter. The oil drain plug is typically found on the underside of the engine, while the oil filter is usually located near the oil pan. Once you have located these components, you will need to drain the old oil, replace the oil filter, and refill the engine with fresh oil.

How do I check the brake fluid level in my Alpina B12?

To check the brake fluid level in your Alpina B12, you will need to locate the brake fluid reservoir. This reservoir is typically located near the engine and is marked with a cap that says "brake fluid." Once you have located the reservoir, you can remove the cap and check the fluid level. If the level is low, you will need to add more brake fluid.

How do I check the transmission fluid level in my Alpina B12?

To check the transmission fluid level in your Alpina B12, you will need to locate the transmission dipstick. This dipstick is typically located near the engine and is marked with a cap that says "transmission fluid." Once you have located the dipstick, you can remove it, wipe it clean, reinsert it, and then remove it again to check the fluid level.

How do I replace a blown fuse in my Alpina B12?

To replace a blown fuse in your Alpina B12, you will need to locate the fuse panel. This panel is typically located under the dashboard on the driver's side of the vehicle. Once you have located the fuse panel, you will need to identify the fuse that has blown and replace it with a new fuse of the same amperage.

How do I replace the air filter in my Alpina B12?

To replace the air filter in your Alpina B12, you will need to remove the old air filter from the air filter housing. This housing is typically located near the engine and is connected to the air intake system. Once you have removed the old air filter, you can replace it with a new one and reattach the air filter housing.

How do I replace the alternator on my Alpina B12?

To replace the alternator on your Alpina B12, you will need to locate the alternator and disconnect the battery cables. Once you have disconnected the cables, you can remove the belt and mounting bolts that hold the alternator in place. You can then replace the alternator with a new one and reattach the belt and mounting bolts.

How do I replace the battery in my Alpina B12?

To replace the battery in your Alpina B12, you will need to locate the battery and disconnect the negative and positive cables. Once you have disconnected the cables, you can remove the old battery and replace it with a new one. It is important to properly dispose of the old battery and handle the new battery with care.

How do I replace the brake pads on my Alpina B12?

To replace the brake pads on your Alpina B12, you will need to remove the wheels and locate the brake calipers. Once you have located the calipers, you can remove the old brake pads and replace them with new ones. It is important to properly lubricate the caliper bolts and brake pad shims to ensure optimal brake performance.

How do I replace the fuel filter on my Alpina B12?

To replace the fuel filter on your Alpina B12, you will need to locate the fuel filter and disconnect the fuel lines. Once you have disconnected the lines, you can remove the old fuel filter and replace it with a new one. It is important to properly dispose of the old fuel filter and handle the new one with care.

How do I replace the serpentine belt on my Alpina B12?

To replace the serpentine belt on your Alpina B12, you will need to locate the belt tensioner and release the tension on the belt. Once the tension has been released, you can remove the old belt and replace it with a new one. It is important to follow the manufacturer's specifications for belt tension and routing.

How do I replace the spark plugs in my Alpina B12?

To replace the spark plugs in your Alpina B12, you will need to locate the spark plug wires and remove them from the spark plugs. Once you have removed the wires, you can use a spark plug socket to remove the old spark plugs and replace them with new ones. It is important to use the correct type of spark plug for your vehicle to ensure optimal performance.

How do I replace the water pump on my Alpina B12?

To replace the water pump on your Alpina B12, you will need to drain the coolant and remove the serpentine belt. Once you have removed the belt, you can locate the water pump and remove the mounting bolts that hold it in place. You can then replace the water pump with a new one and reattach the mounting bolts and serpentine belt.

What is the recommended coolant for my Alpina B12?

The recommended coolant for your Alpina B12 can be found in the owner's manual or repair manual for your vehicle. It is important to use the correct type of coolant to ensure optimal engine performance and prevent damage to the cooling system.

What is the recommended tire pressure for my Alpina B12?

The recommended tire pressure for your Alpina B12 can be found in the owner's manual or repair manual for your vehicle. However, you can also find this information on a sticker located on the driver's side door jamb or inside the fuel filler door. It is important to maintain proper tire pressure to ensure optimal performance and safety.

What type of oil should I use in my Alpina B12?

When selecting oil for your Alpina B12, it is important to choose an oil that meets the manufacturer's specifications. This information can usually be found in the owner's manual or repair manual for your vehicle. Additionally, you will need to consider the climate and driving conditions in your area when selecting oil viscosity.